# Getting firmware information There are two ways to get the firmware version: 1. [Using the shell](https://docs.smartcitizen.me/guides/getting-started/using-the-shell.md) 2. Following the steps below: !!! example "Getting firmware information" 1. Set your kit in setup mode by pressing the ON/OFF button  2. **Connect to the kit** with your mobile device as you did during the installation process. You will need to search for a **Wi-Fi network** called `SmartCitizen[···]`. If you have multiple kits `[···]` is the unique identifier of your kit. 3. Next, go to http://sck.me on your mobile device and click on the top right corner icon:  4. Here you go!  !!! tip "Obtain your firmware version remotely (advanced)" If you are an advance user managing a big deployment of devices you can obtain remotely the version of all the Kits you have registered by looking at the `hardware_info` property of each of your devices using the platform API `/v0/devices/`. When your Kit is in Wi-Fi mode, it publishes the information daily. ``` "hardware_info": { "id": "DFD098A750515157382E3120FF101D12", "mac": "B6:E6:2D:66:47:6D", "time": "2020-04-14T03:00:24Z", "esp_bd": "", "hw_ver": "2.1", "sam_bd": "2019-11-27T12:49:13Z", "esp_ver": "", "sam_ver": "0.9.6-4e90c77" } ``` More info in the platform [API documentation](https://developer.smartcitizen.me/#devices).